Search the Community
Showing results for tags 'breaker trip'.
-
Hi, I recently got a used Master Spas, Legend Series. As soon as the hot tub exits priming after turning on it trips the breaker. So I started unplugging stuff. When the circulation pump is unplugged, everything works. All jets work, light, no error codes etc. As soon as I plug the circulation pump into the board it trips. I ran a test by connecting the circulation pump to a gfci outlet and it runs fine. Didnt trip the outlet gfci. Before I go and buy a new circulation pump I'd like to know if it's the root of my problem, or could it potentially be the heater (even though it seems to be fine) or even the circuit board itself.
- 7 replies
-
- gfci trips
- breaker trip
-
(and 3 more)
Tagged with:
-
Hi, New to the forum and have a question for you all. My hot tub trips the 20 Amp GFCI when I turn the pumps on sporradically. Most typically noted on jets 2, and if they do come on then I turn them off and back on it will trip. Once on they run strong for 30 + minutes. So, powering on pump 1, then pump 2, may work fine, however if I turn pump 2 off it trips the breaker when I turn it back on. I disconnected pump 2 from the IQ2020 and pump one had noe problems. My best guess is its the capacitor, but newb to hot tubs. The hotsprings store said that you cannot buy a capacitor alone, and would need to buy a motor. They also offered to come check it out for a $200 service call. Any advice would be appreciated!
- 1 reply
-
- breaker trip
- motor
-
(and 4 more)
Tagged with: