Search the Community
Showing results for tags 'Durasport'.
-
Hello All! My name is Jason and I am new to the forum. I live in Greenbackville, VA and I work with the NASA Wallops Flight Facility. I am also a first-time spa owner as of yesterday. I have a few questions about my spa and I am hoping that someone else on the forum already has a G2 and can point out that I am just blind and not seeing the obvious. 1. I am right now connected to 110V, but I plan to make the switch to 240V as soon as I can get the electrician over to run 240V to that side of the house. However, in the meantime I want to use the spa. I plugged it in last night around 6PM. The water temp was right at 70F. I set the temp to the max of 104F. By 10PM that night, it had only gone up to 74F. By this morning, around 7AM, it was at 95F. Is this typical of a 110V system? I knew it would be slow at 110V, but it seems to be really taking a long time. 2. I noticed that after a couple of hours last night, the "cool" button lit up and it didn't appear to be heating anywhere beyond the 74F mark. I ended up having to push the heat button a couple of times and turning the jets on and then off to get it out of the "cool" mode. At least I think it was in a cooling mode. When I checked it this morning, it was at the 95F mark, but the "cool" was lit up again. Has any other G2 owners seen this? Is this a sign of a problem? 3. This morning, I was reading about the modes that are offered and it dawned on me that it might be in economy mode. The manual states to press either the cool or heat button, followed by the light button to confirm the mode. Pressing the cool or heat button just results in changing the temp setting and pressing the light button either does nothing at all or turns on the light. I think I am missing something in the button sequence, but I am not sure what. I would assume they would make this so any idiot could operate/program it (so it should be right up my alley ), but I can't seem to get it going to at least check what mode it's in. Thanks for any help/advice in advance! Jason