Jump to content

Nick Harrhy

Members
  • Posts

    4
  • Joined

  • Last visited

Nick Harrhy's Achievements

Newbie

Newbie (1/5)

0

Reputation

  1. Pump runs fine with the panel open. Maybe I can put some extra vents in the panel to aid the air flow and provide better cooling.
  2. Thanks for the reply. I didn’t notice the wires had some discolouration so I will have to look at it again tonight when I am home from work. Zooming in on the photo it looks like some sort of debris. I replaced this motor in March 2021 as the 2nd speed was not working. I will try running the pumps with the cover panel removed to see if that helps. thanks again
  3. Forgot to mention, my spa is a Marquis E series that I have had from new (8 years old)
  4. I would be grateful for some advice on an issue with the main motor/pump dropping from its 2nd speed down to the idle/1st speed after 12 to 15 minutes of running. The 2nd speed then kicks backs in after 2/3 minutes and drops back down 4/5 minutes later. I guess this could be a temperature issue? Water temp is ok and constant. I have added some photos of the equipment. Grateful for any help.
×
×
  • Create New...