DavidProwse

Sorry not been well for a few weeks. That’s all worked fine decided to put a new filter in. Thanks very much for you comments

Hi Ahhsomeguy Thanks for your response. I made an assumption that it was bio-gunk. Thanks for that repot that was quite interesting. I’m going to purge it all again I just have one question if I may. Would you please the cleaner directly into the filter area where it can be drawn through the pumps or directly into the water. I think this is where I made the mistake as I just put it in the water. I guess I’ve kind of answered that myself. The filter area would be best. I saw that it was suggested to leave the cleaning fluid in overnight then run pumps again, then empty. Is this the best way

I have a HotSprings limelight pulse and I used swirlaway then emptied my tub cleaned it all and filled it back up. After a couple of uses I am getting a lot of stick stuff at the water level and the grey filter area is really sticky, please see the images I uploaded. I’m assuming that this has come from the pipes. My water is clear my chlorine level is good ph was high when I filled up but brought that down as I assumed I had hard water. I put a new filter in but the film keeps coming back. Having just emptied and cleaned etc I am a bit loath to do it all again. Could some please confirm this is in fact biofilm and is coming from the pipes. If I have to I’m guessing I’ll have to bite the bullet and clean it all again. Any help is appreciated I’m at a loss as to how this has happend