I recently noticed my HotTub breaker was tripped. Flipped it back on; seen the LCD turn on and shortly thereafter the pumps rans for about 5 seconds and then it tripped again. Tried this a few times, same result. If I unplug the Circulation Pump, it does not trip but then I have errors on the LCD screen "Filter, Pump, Blockage, Air Lock, water". I plugged back in the CP, closed everything up and waited a few days as we had hurricane Fiona come in.
When I turned on the breaker after the hurricane, the hottub ran for at-least a full pump cycle (45 mins). When I came back out an hour or so later it was tripped. I am a bit confused why it trips suddenly and then another time it didn't for at-least an hour. Something might be overheating or perhaps a bad breaker?
I have the Hydropool Self cleaning Hottub, in.xe system. Attaching some photos of the hottub.
Any suggestions are welcome. Maintenance guy was in a bike accident so I am looking at 3 weeks for service. Also is 150$/hr so like to ensure this is not something simple i can handle.
IMG_3002.MOV