I received a Fanstasy Spa free from family. They no longer used it and were running it without issue up until I picked it up.
I filled it today and plugged in the built in 110 GFI plug into my GFI outlet. The manual says to press the JET button to turn it on. No response. I checked all of the GFIs and all was well. I'm getting 110 at the board. The 30 amp fuse is not reading any voltage. I'm not sure if it should be.
All 3 fuses tested fine. I'm leaning towards the topside being the culprit, but have zero experience with spas.
The board is a Balboa 300FREE and the only label I can find on topside reads "Balboa E4 L D CE 8C NO O"
Any advice would be appreciated.
Hopefully, I'm just not seeing some sort of reset.