Jump to content

cmart021

Members
  • Posts

    2
  • Joined

  • Last visited

Everything posted by cmart021

  1. Evening Hope someone can help. Our spa has the Balboa TP600 interface. When we set the spa to rest mode, it automatically switches to Ready in Rest mode without any of the jet buttons being pushed. Just wondering if anyone has had the same issue or any ideas as to what it might be. Balboa response was to lock the controls, which didn't work. They later said something appears to be wrong but no further information. Any help would be greatly appreciated. Thanks
  2. Evening, hope someone can help. We have a passion spa swim spa with a Balboa bp21 unit. After a recent storm we noticed our spa was tripping the breaker. We believed that water may have gotten inside the spa. On inspection there was a little ground water but nothing substantial. After researching we unplugged the heater and ozonator. The breaker still trips after about 3 minutes. We then tried unplugging the circulation pump and the breaker did not trip. Having spoken to our supplier, they have said that it is rare for the circulation pump to trip the breaker. No water from the storm appeared to get on the pump as it is slightly raised. It will be a few weeks before they can get someone out to look at it. Would anyone have any ideas or simple fixes, short of replacing the pump (if that is even the cause)? Many Thanks Chris
×
×
  • Create New...