the mighty Q

Ok so I switched the black wires for the bower and the circ pump added a jumper to the pressure switch and started it up. When I first turned on The breaker A red light came on for the heater indicator light. Then water began to flow from the outlet hose from the heater for a brief minute then it stopped. The jets worked and but the heater did not continue work. I have tk pick up a voltage meter today to text the fuse. I will be send more photos so you have a better idea of what’s going on. Thank you

So I was not supossed to do that?

Ok so I did what you said and the heater light does come on now

Nope, I have to take some of the credit. The previous told me it needed a new “program board” and showed me this picture that I will upload here. So I had a guy come install it he charged me an arm and a leg. The seal in the back of the heater had a crack in it so it was leaking water out of the back of it so I ordered and installed another one. I only installed the wires for the new heater. The breakers where constantly tripping due the incorrect wiring on my part. Attached below is the original board that came with the spa that the original Kerner said I needed to replace.

Lol yes very inexperienced. Just bought my first home and the jacuzzi came with. Lol

I did what you said and I got the jets to turn on and not trip but now the heater isn’t heating the water. Then jets are turning on strong and blowing well but the water isn’t coming out of the jets hot at all. It’s just blowing the cold water. Hears a pic of the board now. Let me know if you have any suggestions. thank you. IMG_2331.MOV

Couldn’t have done this with out your help thank you IMG_2321.MOV

Found this online

Ok Great thanks I’ll look on google.

The breaker only trips on the 30 but the spa remains on still.

Ok so I’ve disconnect the h2 wire from where I had it originally. After attempting to start it now when I press the button to turn on the jets only the 30 amp circuit breaker trips. I’m making progress but I’m not there yet. Any suggestions?

Ok I will do that. “Heater 1” and “heater 2” thank you

I will switch the white wire and in the morning when I have more light and try and follow this diagram exactly. thank you very much

Ok that’s good to know that it may not be more serious then incorrect wiring. Thank you

Would you have an idea of which wire is supossed to go into H2?

being that this is my first time ever dealing with anything like this, that is a very high possibility. Thank you.

Ok, I will take a picture and get back to you very soon. Thank you.

Hello, hopefully someone can help. I bought a house with a tiger river spa. The previous owner said that all it needed was a new program board. I got the new program board and had it installed. After installing it The technician noticed water leaking from the water heater. I just got the new water heater and installed it today. Now I’m very new to the spa world. I fill up the spa and Cut the spa on and when I press the “jets” button it the “30 and the “20” both trip on the breaker box and the spa turns off all together. Any advice? The new program box came with a different control panel but the technician said that it didn’t need to be changed. Could that have something to do with it? Also the heater isn’t getting hot to touch, I’m not sure if it’s supossed to.