Hydroquip
-
Posts
6 -
Joined
-
Last visited
Hydroquip's Achievements
Newbie (1/5)
0
Reputation
-
Anyone any suggestion here? I can’t believe I am the only one with this problem since this is a well known brand?
-
I have ordered a new pump removed the old one and attached the new pump. The problem is still here. Four dots are flashing on the controller panel with the temperature of the water. Lights are on. Any other suggestions? Please see attachment IMG_2741.MP4
-
Thank you for your fast reply. I have testen the pump by taking a 230v directly to the motor but it does not do anything except turning of the powergroup. Just a double check: isn’t it that when in turn on the power of the jacuzzi that i should hear some relays working? When i press some of the buttons on the control panel i don’t hear any relais clicking? I just want to make sure if the hydroquip gecko motherboard is not broken as well.
-
Hi thanks for your fast reply! yes the water is above the highest jet and above the filter. I have turned off the power and then I have removed the filter. putting back on the power the control panel is giving me now an error 9.5 with 3 dots (see attachment). The pump#1 is not moving either. So conclusion for now: - Jacuzzi is powered on the control panel works and the light inside the jacuzzi as well - the water is not moving - Heater I have measured with my ohm meter it has around 25ohms in the attachment you will find the pictures.
-
so in the meantime i got rid of the error 8. restarted the hot tub by turning off the power for 1 hour and turn it on again. now i get an error .9.0. on the display (see attachment). does anyone know what this means?
-
Hydroquip joined the community
-
I keep getting error 8 on the hydroquip display. When I power on the jacuzzi the light works as well the controller. I can see 8.0 on the screen when turning on the jacuzzi but it does not do anything. Controller light works and jacuzzi light as well. Anyone any idea what this can be? And how to troubleshoot? I am especially curious what the error 8.0 means.
