Jump to content

N11K

Members
  • Posts

    1
  • Joined

  • Last visited

N11K's Achievements

Newbie

Newbie (1/5)

0

Reputation

  1. Hi, first of all a thread like this has been needed for some time and so glad I found it after years of fighting with the PCU v1 & v2, thank you for starting this tenzen. I had the E5 error code and tried all of the above possible fixes. I appear to have fixed mine and thought I would share what I did as it may help someone else. The image provided by Akira1424 *hope you don’t mind me using it* below shows an arrow pointing to 2 blade crimp connectors, mine were fixed to the sensor but were a little loose, I used some pliers to tighten to the blade crimps and fixed back onto the sensor with no wiggle and this fixed the issue for me, it must be a very sensitive part and with me stripping down the unit and putting back together numerous times had loosened them. Hope this is of some help 😊
×
×
  • Create New...