Jump to content


  • Posts

  • Joined

  • Last visited

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

AndyO's Achievements

Junior Member

Junior Member (2/5)



  1. For those looking for the relays I used and where the broken track in the circuit board was...I've attached some pics. Zoom in to see where I've circled the broken track on the circuit board pic. btw...it's nearly a month later and the spa is going great. We've been enjoying it more than ever. Cheers, AndyO
  2. Yeah cool, I might get one to try and see. Might need a bit of teflon tape around the thread, but probably fit.
  3. And they just got straight back to me and said they don't ship to Australia. Might have to get it shipped to my relatives in the UK and get them to send it on to me.
  4. No dice...in their own words, they don't have a source for LVJ. Have sent a message to these guys to see if they ship to Australia https://www.tubs.fr/en/index.php
  5. Thanks mate, I've sent them a message but will be a few days before I hear back due to public holidays.
  6. Hey Everyone, I'm looking to replace some/all of the spa jets in my tub. They are stamped with LVJ which are extremely hard to find. The Jets I have are 90mm (3.5") across the face and 100mm deep, screw in type (photos attached for reference). Does anyone know where I can find replacement Jets (that ships to Australia), or know of another brand that might fit and be easier to source. Cheers, Andy
  7. Replace all the relays, couldn't get Zettler, had to go with TE. I also found a cracked track on the circuit board which I repaired. I now have the heater working again. Thanks for your help.
  8. Don't see any burnt parts or dry joints on the circuit board...
  9. Yeah, no power...I'll remove the circuit board and test the relays.
  10. The light does go solid, but there isn't any voltage to the heater. It's like the relay clicks in but doesn't stay that way.
  11. Hi everyone, I have a Spa with a Balboa GS100 controller. There are no error codes showing, but when the heater relay clicks in, I get voltage at the heater element pins for half a second, just enough to ping the multi-meter, but then nothing. The display panel is the VL260 which has 4 buttons (warm, cool, light, jets), with led's above the jets, light, and cool button. When the heater comes on, the light above the cool button comes on, then after a short while it begins to flutter (blink rapidly). I've gone through every reset I can think of, the filter is currently out, I've made sure there are no airlocks and all the jets are open...any ideas? Cheers, Andy
  • Create New...