Jump to content

mun3

Members
  • Posts

    3
  • Joined

  • Last visited

Everything posted by mun3

  1. Hi I'm trying to diagnose a fault with our cell with a multimeter. I noticed that the voltage across each electrode and the common out of the water is 9V and the output voltage from the box is around 9V as well. However, there's no current going through them when measured between the electrode and ground. Does anyone know what the problem might be? The salt level is good. Thanks
  2. Hi I've noticed that our cholorinator has only been around 30% effective recently based on the reading on the builtin meter. Does anyone know how to tell if the fault lies within the cholorinator or the salt cell? The cell has 4 plates and two of the plates stay clean whilst the other 2 plates have calcium built up. Does this mean only two of the plates are functioning? The cell was cleaned with acid only last week. Any advice appreciated.
  3. Hi I'm looking to replace the A frame in my Hayward Vac XL and I've found a used Vac Classic online for about the price of an A frame. Does anyone know if Vac Classic and XL share the same A frame? Thanks
×
×
  • Create New...