Jump to content

Jt4104

Members
  • Posts

    10
  • Joined

  • Last visited

Posts posted by Jt4104

  1. Just purchased a Azure Premier by freeflow and was going to hardwire to 220v. This is replacing the old marquis spa and I already have the 8 gauge wire to hardwire. Has anyone done this on their own or were the plastic separator tabs for the wires to flimsy to use. Was contemplating doing it myself but am also considering an electrician. Full honesty tried myself and I think I bent tabs that I would stick wire in. Put 110v back in but no plug to plug into so hooked up to extension cord but getting no power to hot tub. Yes I know....stupid

  2. Yes the filter was removed and ran and no change. Yes I have cracked both couplers and Let it bleed out and still no change. At the end of the day when I take the electronic box off and look at the wiring inside the motherboard you can see it physically trying to click over to high speed pump for whatever reason. Have done virtually every air lock trick I can find. I will look to find if there is some kind of one-way valve that I don't know about.

×
×
  • Create New...