Supra9497

Well this was the issue. It was little broken up leaves on the face of the pump. I didn’t see them in the water ever but they were there I guess. This got my pressure from 2 out of the 3 water outlets for the heat. So i opened the valve after the heater and out came leaves and now I have pressure from all 3 heat spots! just wanted to say thanks so much for the help! You guys are great.

I did. Still displays it Sadly

Ok I really appreciate the help. Heat pump staying on. Loosened the suction fitting and somehow got the air bubble out. The pump still on all 3 spots where the hot water comes out has flow now. New issue the hot hot tub says hfl now. Can’t make this up. But you guys are really helping me out !!

Ok I misunderstood. Yea the heater circulation pump runs. The shaft spins. When I look in the tub the 3 heat spots where the heated water usually comes out from currently has no flow except for 1. Sometimes you see a slight bubble out of the other 1 . Then the heat pump shuts off.

Yes full flow from the jets when it is running

Yea it had a lid. Water use to cycle through and spin out slightly under pressure. Now with this going on it does not. And no no multimeter unfortlentatly

Thanks for the quick response. Forgot to mention I took filters out and didn’t solve anything. So I ruled that out. Jets work. The heater pump turns on. I loosened each fitting next to the vs series box and water came out no hissing of air. When I filled the hot tub I put the hose in the filter hole closest to the control panel and the water filled up and the filter line and came out from the top and filled the tub. Does that possibly indicate a clog in that line maybe ? Thanks for any help or suggestions ! Greatly appreciate this.

Hey guys new to the forums. Looking for any help possible. I Went out to hot tub and my display was readying “dry”. I understand that this indicates my heater is running dry. Water level was correct. I drained and re filled the water. I took the panel cover off and attempted to release any air their might be that was locked in by loosening the fittings and retightening Any other options I have here before I call a technician ? It’s an alps spa. Unknown how old It was left by previous owner 2 years ago.