robkapl

In pool & spa mode. We have tried the cleaner in both aux 1 and aux 2. Same problem crops up. Aux 2 is set to CLEANER. I will pass the other suggestion on to the technician and hope it works. Pentair wants to replace the pc board again. It seems unlikely to me that 2 boards are bad. Do you know if they have been having problems with the new boards? Thanks.

The filter pump is a new Intelliflo 2 VST. The pool cleaner pump is a Polaris PB4-60 The filter pump runs from 8am to 2pm. The pool cleaner and pump is supposed to run from 11am to noon. The pool cleaner pump turns on a 11am but shuts off within 20 seconds. Pentair has replaced the relay box and the circuit board. The new circuit board and the old circuit board does the same thing. The Suntouch controller is brand new.

I am having problems with a new Suntouch controller. My pool sweep is connected to the aux 1 circuit. The controller turns on the pool sweep when scheduled but the pool sweep turns off after 20 seconds. Pentair has replaced the relay and the circuit board but the problem remains. I have tried the aux 2 circuit and the same thing happens. Any suggestions for what to do?

I am having problems with a new Suntouch controller. My pool sweep is connected to the aux 1 circuit. The controller turns on the pool sweep when scheduled but the pool sweep turns off after 20 seconds. Pentair has replaced the relay and the circuit board but the problem remains. I have tried the aux 2 circuit and the same thing happens. Any suggestions for what to do?