Jump to content

Brian Smith

Members
  • Posts

    5
  • Joined

  • Last visited

Brian Smith's Achievements

Newbie

Newbie (1/5)

0

Reputation

  1. Well now it seems as if the whole unit will not turn on at all. The pilot is lit and burning but when I turn the switch to on and crank up the thermostat nothing happens. I'm thinking thermostat or the electrical board. Any ideas?
  2. Well now it seems as if the whole unit will not turn on at all. The pilot is lit and burning but when I turn the switch to on and crank up the thermostat nothing happens. I'm thinking thermostat or the electrical board. Any ideas?
  3. Thank you! Will try it when it's not snowing and a little warmer in a few days.
  4. Maybe an lrz. It only lights for two seconds. I've timed it out several times.
  5. I have a Jandy LRX natural gas heater for an inground pool that's about two years old. It's operated by the millivolt system. The pilot light stays lit all the time so I know it's getting gas. Our furnace for our house runs fine. When I turn the heater on it lights up and stays on for two seconds then goes out. It will cycle like this forever as long as I leave the thermostat turned up and the heater turned on. Any ideas what may be causing this?
×
×
  • Create New...