Mska

Thanks A lot appreciate the advice.......I just did a purge and refill right before using the Splash proof ....Im going to do a partial drain see if I can Dilute it.

I used Clorox Splash Proof bleach its quite thick to prevent spilling now my Hot Tub looks like a huge Foam party. Used a SeaKleer Clarifier and a De Foamer but still got the foam... do I need to drain or just keep adding water to dilute it? Thanks in advance for any help I would post pics so you guys could get a good laugh but not sure how to upload it onto this forum topic.

Buy a Taylor Drop Test Kit...... worth the investment.. much more reliable then the strips.

Thank You Wizard of water... I just retrieved my Taylor K-2006 kit...will the MPS combo with Chlorine alter my FC reading? Just to Clarify... Before I soak I check the water to see if I ned to add chlorine and add if its too low ...do I add MPS as well? After the Soak add a combo of MPS and Chlorine after doing another test with the drop kit... I should be able to figure out chlorine amount using Chlorine demand how about MPS? do I check CYA as well each time? Dar

I've been using Nature2 and I wanted to switch to dichlor/bleach but I have a couple of concerns... we started with Nature2 and was told to add dichlor granules before and after every use.... And MPS once a week.... This was fine but my PH started to fluctuate. I am going to drain and refill my tub and switch to dichlor /bleach but I have a ton of MPS left .... Can I still use the nature2 with this method if so how? I'm not a big fan of the smell of bleach nor the smell on my skin after showering like at public pools and spas. I have a Jacuzzi-335 360 gallon tub. We also are in California under drought restrictions so using Nature2 would have allowed us to reuse the water for our grass area. Any help on what and how to do it would be appreciated already got a Taylor 2006 drop test kit. Dar