Jump to content

john44111

Members
  • Posts

    28
  • Joined

  • Last visited

Everything posted by john44111

  1. ok.. well.. that seems to be pretty unanimous. so if I am understanding correctly under no circumstances should water EVER come out that seal? and it CANNOT ever leak? so I should be able to close the gate valve right in front of this pump and the water will NOT seep out the seal it will hold inside the pipes? is that correct?
  2. I just switched from a N2/Dichlor/MPS system to the PPP (or Dichlor/Bleach system) you are on. From Page 2 of the Nitro's Approach to Water Maintenance available here http://www.poolspaforum.com/forum/index.php?showtopic=13634 my CH is 100 (City of Cleveland Water) I didnt have any CH issue.
  3. yeah I am really not sure about that. I watched for about 20 minutes with a flashlight to see if ANY water dropped or the shaft got wet.. NOPE. and I put a paper towel folded up underneath where the motor shaft enters the pump seal yesterday before I buttoned her up tight. It has been running now for almost 48 hours. just took a panel off after I read that last post. Bone dry.. not an ounce of moisture. all the puddles have dried up from the previous "flood" and well everything looks good. The funny part is it has been sleeting since about 9pm last night..but inside still no moisture whatsoever. The part seems like it is 13 bucks or maybe as high as 30 but. Ill keep an eye on it. looks good from here.
  4. ok so 2 days past.. no leaking.. the case is all buttoned up now. I am thinking this is one of two problems. 1. Maybe I had some ice in the system SOMEWHERE. 2. Air pocket. I did something that in retrospect seems dumb. When the tub was dry I changed the spa filter and replaced it with a perfectly new DRY (and previously cleaned filter) I have two and I rotate them weekly. Cleaning one then letting it sit for a week. Maybe that created some form of weird vacuum? I dont know for sure. I am thinking I *MAY* have had an airpocket in the system maybe AIR in the lines dissappated with me letting the tub sit overnight.. maybe adding 80 gallons of 105 degree water unfroze something. I guess we will REALLY never know. I am going to pull the case off this evening and take a look I anticipate I wont see ANY water at all down there. strange goings on there.. maybe everything is cool.
  5. First off.. UPDATE.. it isnt leaking anymore. Thank you for the ideas. I am getting more confidence with this job as time goes on. I could tear a car down to the crankshaft and not flinch tubs mystify me. That is fading. Ok I have a STRANGE update. last night around 10pm I went out with a 100 foot hose and filled my hot tub with water from my 40 gallon water tank. I ran the house out a door and into the tub. I used the hot water until it was gone once. Waited 30 minutes and did it AGAIN. That made a significant difference in buffering the temperature. As everyone knows I went and put 2 75w clamp lights inside the case and buttoned it up. anyhow come out this morning look at the tub inside. Take the two access panels off and.. dry as a bone. (not surprisingly) the water wasnt frozen. Some water I drained on the patio was however. I flipped the breaker on.. it sat there priming for what seemed like an eternity. then the pump turned on. watched it.. no GUSHING flows of water! I watched it some more. .. no so much as a drop is coming out. I turned on ALL the pumps full blast.. No water is coming out. umm..... so.. I am going to watch it now.. and see but.. Can I call this some form of Ice blockage? It isnt leaking one bit at all Just checked again it has been 30 minutes (When I started this post) still NO leaks.
  6. excellent Thank you for the answer. Still no call back from the dude. What the heck it is saturday afternoon.. prolly has a family. Its cool just would have been nice to get the answer from him instead of this great forum. Regardless I covered it with the 10x10 ezup and it is sealed up for the night with TWO 75 watt bulbs (you cant buy 100w anymore! I have all CFL bulbs in my house. I had to go buy a 4 pack of 75w bulbs for 1 dollar. ) The cover is on the tub. the lightbulbs are inside and sealed up with clamp lights (MY trouble lights are ALL LED now no more incandescent bulbs) I also put one 75 bulb by the pump and equipment.(no pic I already sealed that one inside the case) so.. total 225 watts inside the sealed case. since I took this pic I took out the left one in the picture leaving just 2 bulbs inside the sealed cabinet. So.. here we go. I am betting I get a NO to this question should I bother to add hot water with a 5 gallon bucket to the tub or because it is only forecasted to be 27 I should be "ok ish"?? Thanks again.. made me feel much better. in retrospect.. I am going to call the service guy from a place I buy from on a saturday just to see what kind of response I get before I buy. I thought of that before I bought from this big company that sells more than hot tubs. Oh well.. I just need to calm down. Everything is going to be cool. 4 hours isnt bad tho.. I thought I was in some IMMINENT danger...but apparently I am ok. wife says parts and labor covered 2 years.. hopefully that is true.
  7. This was a weird double post.. Ill comment in here too tho. When I drain the spa first thing I do is turn the breaker off. So the tub is 100% off when I drain it from the breaker panel. I dont want ANY drama with electricity until the spa has the right amount of water. So it is 100% completely off. I remember reading the manual and it saying dont turn the power on until the water is halfway up the filter opening. Another question however. 1. The water is like 38 degrees it is ALL new water a. should I put chemicals in it? (probably not.. I am guessing it is too cold) b. should I be adding HOT water to the tub? I think it is really close to freezing 38 degrees last time I checked. (when I discovered the pump seal is leaking. Thanks in advance.
  8. Ok well I am sure you guys are getting used to my postings by now anyhow.. So some of you might remember my little chemical battle last week and now we are on to something new. I changed from a N2/MPS/Dichlor system because of what I think was an MPS allergy. I switched to the Dichlor/Bleach method. anyhow. The wife and I were in the hottub last night and.. although my rash is mostly gone it was itchy last night... at 2am and it STILL was eating chlorine fast (That probably was just us using it) and I figured I would drain the tub today. Temp was 38. So I figured go for it at noon. BAD choice I think. Drained it fast all the way down.. got in cleaned the shell inside.. got all the water out with a sponge.. the cleaning took about 30 minutes. Then started filling from the hose (nothing abnormal. I have done this before. ) took an hour and a half to fill. I turn the breaker on and it goes through the prime cycle.. then.. I am fiddling with the top and SNAP the breaker blew.. well maybe it started heating.. it was too much so I reset the breaker and watched.. it started again. (In retrospect this was probably dumb throwing it but it did stay on. Now I am betting it popped because of an actual ground fault) Well. live and learn on that one I guess.) . water temp 38 degrees... it starts heating no problem.. so I leave and come back about 30 minutes later. I notice water coming out of the front of the tub near the base. I see it.. I wipe it away with my foot.. I can see a little rivulet of water coming from the bottom seam.. so I turn the power off completely check the drain.. (it is all good) then I take the panel off. I mop up the water with a sponge.. let it sit for 30 minutes.. the water DOESNT come back. So I am thinking cool . No big deal. I shoudl have put the hose on the drain.. I didnt.. maybe water leaked back in. so.. I have the sides off and I start it up again.. as soon as the 2HP pump comes on water comes out of here. Right at the place where the motor meets the pump. So, I dont know much but looks like to me that the pump seal is leaking. I turn the water off.. NO leaks.. JUST when I have the motor on. It has been off now 2 hours (I called the service guy's cellphone. Nothing yet.) so.. here is my questions 1. Could something be frozen? Temp outside is 38F. The water was up to 40 when I shut it off. 2. What do I do now? Drain it? 3. Is it a bad pump seal only? 4. Why does it not leak when the water was warm? 5. The temp will be 27 degrees tonight. I am assuming the guy will call me back and tell me what to do. Do I drain it? DoI leave it alone? Do I put the side panels back on and the lid? Do I get a small space heater and put that inside to keep it warm tonight? Thoughts? kinda freaking out. The tub is only 4-5 months old.
  9. 2006C ordered from Amato via amazon prime. (cant beat 86 shipped) was ready to buy in the store at leslies pool.. they wanted 119 in store. Their online price was 109. I say "do you pricematch your OWN website? " "no they are trying to get people to go online" So I said "huh?.. well I am going to buy it for 86 from Amazon then. So.. yea tell your boss that the getting people to buy online is working" also now on the dichlor / bleach method.. and the water ISNT giving me rashes.. PLUS I love it. It FEELS warmer.. I love the smell it LOOKS CLEAR too. I love it. THX!
  10. Ill put my 2 cents in my wife said the same thing to me after our last cabin trip. (all we did was hot tub.. she said.. this is dumb lets get one for home 2 weeks later it was delivered right before the snow. 220v is going to save you money in electric bills and last longer/ heat better. Dan The Spa Man NAILED IT in his post.. 120v is penny wise pound foolish. I wanted the 120v for EASE and speed but the limitations of 120v were huge.. plus the cost difference in electrical.Running a 220V line isnt hard either. Just make sure your box is more than 5 foot from the tub Dont get a small tub.. I did the research.. wound up with a Viking Royale ETS. I checked the features and prices.. The viking had exactly what I needed. lights. power good heater, nice durable shell. nice cabinet (plastic) it is holding up GREAT Come in there with Cash. Id been renting cabins in southern ohio for years. I talked to the maintenance guy.. which one out of your 45 properties gives you the least trouble. "The vikings have been around for 12 years. Never had a problem with them and they are built great. They take a beating." I went to my local store with 4000 cash.. The price was 4700 but that was the CREDIT price.. they say zero percent interest.. but they just charge you more. So.. pay it.. and get a better price. I did.. couldnt have been happier.. It isnt too big.. it isnt too small. For us two.. We dont need baller class hot tubs. It is PERFECT for us.. we just came in after an hour and a half outside. Love it.
  11. Thanks for the "no need to drain" thing.. i have test strips for MPS (Thanks, I am calling it the correct thing now. Thanks for those that cleared that up) they didnt turn purple AT ALL. so.. that was yesterday.. perhaps we are good. I didnt have the N2 stick inside the filter. it was (per the spa people's recommendation) inside the filter basket. Not actually in the flow of the water. did that affect how much silver got in the water? Maybe.. I cant say for sure. no way to measure THAT.. (the directions for N2 say "The clear water is your indication it is working" <--- what a load of bunk THAT is) anywho. We are switching to chlorine.. no one has been in 2 days. time to do some reading of the dichlor / bleach method and make sure we have the proper diagnostic kits. (we dont yet) I bought this http://www.lesliespool.com/Home/Pool-Chemicals/Water-Testing/Test-Kits/18548.html ugh.. I am going to read to see what I should be measuring, how to get it there.. i am just hoping that the water is good and I dont have a damn microbe farm growing.. but I am thinking there is plenty of chlorine in the water now.. no one has used it.. so.. maybe it is good? I think the TA is too high though to start dichlor / bleach (not sure.. my wife said that.. I gotta read it. She might have been the pool manager 20 years ago and lifeguard.. but I am the scientist of the family. so we will see. no more itchy stuff.
  12. good show.. about to make the switch.. We got the print out of how to do it.. My itching is going away.. I am about 20% as itchy as i was yesterday. sadly it snowed last night.. and was snowing this morning and i couldnt go in the tub soon however
  13. got it printed and bought plain bleach on the way home now just need to figure out if i HAVE to drain the tub and start fresh. It is 27F outside and I changed the water 3 weeks ago.. :/
  14. ok CG follow up question.. I am going to go to Dichlor/bleach. I have all the supplies.. can I remove the N2 stick now and follow the instructions you have here or should I drain it completely and then start again fresh. if the irritant is PPMS (AKA MPS AKA Non chlorine shock) will it completely dissappate? or will I have to change the water to get the N2 our and the MPS? just wondering.
  15. check it out I am ITCHY as hell right now.. hoping this stuff dissappates.. we are switching to chlorine and bleach.. I picked up plain clorox at Home Depot on the way home. We have to figure out THAT system now. I was just thinking. oh no.. I have sticks that test MPS.. but.. if i was using THIS.. I wasnt adding MPS.. I was adding PPMS.. ugh... no WONDER I am burning.. people put 1-2 tsp per person.. my wife was using 4-6 TSP..
  16. THanks CG.. we are switching to Chlorine and Bleach. just trying to figure out right now if we need to drain or it will naturally disappear in a day or so. Here go.
  17. but.. I am not using MPS. I am using the Nature 2 system with this. Which is PPMS not MPS. so do I stop using N2 all together and go to a straight chlorine system? Straight Bromine? what system would be the "chlorine system"
  18. Interesting.. I am using the Nature2 system and I have been up since 4 am itching. if we were to use this chart as indicated in this thread I am going to call my problem (and probably yours) a chemical sensitivity. Now with a week of testing when I get bumps I am thinking chemical sensitivity My thread is here.. I guess I didnt see all these "help I am itching" threads until now. http://www.poolspaforum.com/forum/index.php?showtopic=44325 I was about to switch to a pure bromine solution since previous to us owning a hot tub I had been in Bromine tubs with no side effects. Of course we got our tub in November of last year and my "problem" started about a week ago. Ive been in the tub every day at least once since November. Water has been drained 3 times so far. I am reasonably sure the chemistry of the water has been dialed in the whole time too. I am at a loss but it is good to see others here with what seems to be the SAME problem. I am a little concerned because my non chlorine shock ISNT MPS.. so.. I am not sure what that means at this point.
  19. Interesting.. I am having what I beleive is a similar problem. Not MPS mind you but PPMS (potassium peroxymetasulfite) Natures Way brand of shock. Which isnt MPS, I thought it was until I read the bottle. Seems "non chlorine shock" is more than just MPS. (Monopersulfate) in my case it was PPMS. (Potassium Peroxypersulfate) I wonder if I ALSO would have an allergy to MPS. Originally it was suggested here that I might have focculitis but it is "good" to hear others who have a itchy rash that isnt pimples. I've had my water tested now twice. They both said "You are good" Dunno. I might have to get to the doctor as well I am itchy right now in quite a few places. The my thread is here, you might see if there is some similarities but it sounds like we are using different chemicals. http://www.poolspaforum.com/forum/index.php?showtopic=44325 Ive got bumps.. but not red (unless they are the ones that I scratched raw) I went in yesterday for 15 minutes in the morning and about an hour last night.. this morning.. woke up 4am.. with itching and a little bit of burning as well.
  20. Here is a HELL of an article on PPMS. The Natures Way Spa Shock which is Potassium Peroxymonosulfate. http://www.ncbi.nlm.nih.gov/pmc/articles/PMC2921763/ Wow.. what a read So.. interesting stuff. 1. All men 2. ages 45 and up (I am almost 42) All this information but I am only confused as to what path to take now....
  21. ok one week update. I am still itching like mad. I have had my water tested TWICE now. both times I am told. "it is perfect" The bumps I am getting arent little pimples and they arent really visible either. I was searching for Monopersulfate rash and came across this post http://www.poolspaforum.com/forum/index.php?showtopic=26450&p=119364 where she desribed her symptoms and I think I am having the same thing. You can see her post history.. http://www.poolspaforum.com/forum/index.php?showuser=30535 She posted didnt get an answer and didnt post a follow up but her issue sounds the same as mine. I sent her a PM maybe the email system gets through to her and she responds. I dont know I am at a loss. Now I have had my water tested twice now both times they tell me "I am good" so is it possible that what I am experiencing is a rash to the Non Chlorine Shock (Potassium Peroxymonosulfate) The stuff on the left So, i am kind of wondering where to go from here. I can be reasonably assured water chemistry is good (I assume from what I am being told at the store and what I read here) Do I have an allery or am I sensitive to this stuff? It has been a week and the itching keeps coming and it goes in similar places. my back of my legs and my back where my shoulder blades are. It keeps itching it seems to go away then it comes back. Id even say it is starting on my stomach as well. no bumps there just "itchy" so... What possibilites are there? get out of the tub until it completely clears up? I am guessing that will take at LEAST a week at this point. Visit a dermatologist? That is going to be weeks before anyone sees me (specialist) change to Bromine? (I've been in bromine systems before and never had any problem but like that womans post. I was FINE the first 6 months of this nature2 system NOW all of a sudden something is going on and I have a "barely" visible rash but am very itchy. Thoughts? Ive got lots of things to try but all of them are going to take a lot of time and energy to accomplish. Oh and this post might be due for a move since it is mostly about pool chemicals not just spas and pools. I didnt see the other one when I originally posted this thread.
  22. Yeah I actually sat under this in my local Sams club when I was about to buy that Ez-Up (for 200) it is really nice nut at 1400 dollars I just dont think it is worth it. I pushed on it and the gauge metal it is made of is SUPER thin. The way the parts are connected together are kinda cheap. Classic "made in china" nonsense. Dont get me wrong. If you had sun all day and no wind, no winter I think this thing would be great. I also saw this outside a bar in about 5 miles from my house. I am not sure how long they had it up at the bar but I am sure that is out in the elements this whole season at least. They had some sort of plastic or canvas walls on it to block off the wind. It was a structure placed outside for smokers to hang out in and smoke since we have those no smoking rules in Cleveland. I really like the idea of this shelter I just really dont know how well it would hold up. I also have in my head the cost of building some structure around 500 dollars and being solid. Certainly less than 1000. That will be made of wood. That is a good design. I like the shape and the size for certain. When I start designing something that is the basic "Shape" I am going to go for.
  23. well good show.. I am due for a water change anyhow... sliding it another 1.5 foot to the east shouldnt be a big deal.
  24. Ugh.. that IS what I have. so.. heh.. sounds like the kit is "worthless" I also have 2 different style of strips too (one of which is the actual nature 2 ones. so. I think what we are hearing here is MPS sensitivity = itchy bumps TOO. not just focculitis? Sounds like what i am hearing. Or if we are talking about the burning back. Heck the burning back thing I am actually fine with. I am one of those weirdos that LIKE sunburn after a nice day sailing or boating. Ahh.. yes. I have the Viking Royale ETS-5 and yes it does have Ozone in it. That is super interesting finding out that ozone kills the chlorine. ugh.. that makes this even harder.. ok.. I am taking heart however I appreciate the feedback on this. I honestly feel like I am going to get this right here sooner than later. you know what the hard thing is.. is I REALLY REALLY dont see this documented well anywhere. This Nature2 system and since you have to run low chlorine numbers because of this mysterious silver thing it makes it so you really CANT be sure if you are sanitizing it right or not. I keep hearing about this bleach thing. I am going to go give that a read too. I saw that FAQ day one and never got around to it since we have the nature 2 system. what is funny is i have had 4 COMPLETELY different ways we have been told how the N2 system works. None of which seem right. It seems like the REAL way is to be able to test MPS RELIABLY (Titrate way?) so you can ensure proper sanitiation levels. Well I am pretty good at describing things. I have been known to be able to write pretty good "For Dummies" versions of things. I think when i get this figured out I will just write a for dummies N2 System guide and make a video. I CERTAINLY cant find a video on it ANYWHERE. Thanks again for all the help those who replied.
  25. Another question that was bothering me.. Why would someone build a Pergola around their hottub. for me.. I have snow and rain.. and my wife.. man, she HATES rain and snow getting on her.. Sure the first few times it was ok. but now. nope.. not having it. I could do without it. so.. pergola? looks interesting but I dont think it will come anywhere near my needs for snow/rain protection. Why do people build pergolas? doesnt seem to serve any purpose but aestetic. Am I correct? Maybe I am missing something
×
×
  • Create New...