Jump to content

Saarland

Members
  • Posts

    2
  • Joined

  • Last visited

Saarland's Achievements

Newbie

Newbie (1/5)

0

Reputation

  1. Ok so I have seen other threads on this but no solution: I have a aqua pure 1400 it use to show the water temp and salinity but now it only shows the salinity in boost mode. In normal operation it had 00 on the readout and says wait and the led cell reversing lights up. If I put it in boost with the handheld it will show me the salinity on the hand held and on the main board the led cell on. I have replaced the flow meter maybe that is why it is working in boost now with the old one I did not notice it working in boost but it might of been. No error code just wait and led cell reversing and 00. I also turned off the power for a time to reboot it took out the 9v and everything. Unplugged the 4 wire connector in the right corner of the board. Is it time to call someone out, I have not done that because he wants $125 just to come out and I am worried that it is going to be this giant about for parts. I already spent 200 on just the flow sensor should I just by chlorine, I do have a supplemental inline chlorinator that I use during the 110 days and the generator can not keep up.
  2. Mine is doing the same thing I thought that it was the flow sensor so I replaced that at $200 because that pool guy wanted $125 just to come out, that did not do the trick. I did not notice until I replaced the flow that it was working in boost. Just 00 on the display during normal operation and the word "wait", no cell on or flow light on. On the hand held no more temp or salinity during normal operation but during boost there is flow led and the cell on on the panel and on the handheld there is the salinity. Can someone help??
×
×
  • Create New...