brian1973

it sounds like someone doesnt know how to read a transit or didnt care and just wanted your money is it a steel pool or fiberglass during excavation the groun should of been within 2" at least when we excavate a pool where are you from? '

scent of a mule is funny our friend is sheepman maybe yous should get together lol

sounds like the heat exchanger went bad probably due to the ph being incorrect

local pool builders beware these people will not pay you for your services

have you all ready purchased your pool?

it should have some stretch but not that much did you square the pool?is it the correct size?what brand of liner?where are u living in what state?it could be you dont have a enough sand in the bottom it would also cause this>did you put a cove in?being that tight could split a seam in the liner or buckle the pool wall in ruining it if you have any questions let me know brian

no i had a vinyl liner pool installed my decision was easy they built several pools in our development they did a outstanding job explained everything made evrything affordable .

check out www.rivierahottubs.com i think you will get a lot more for your money good luck if you wold like info on a dealer let me know

if you where closer i have a brand new 2010 tub for 4,000 look at www.rivierahottubs.com check out the outerbanks model it is 78x78 it has both bench seating and lounge 5hp duel speed pump

check out www.rivierafiberglaspools.com and again give fantasy pools a call for information and pricing at (717)548-4112

give fantasy pools llc a call they do fiberglass pools thier number is (717)548-4112 they will be able to help you

give fantasy pools llc a call they are from southern lancaster i know they are chargeing about 21,000 for a 20x40 every thing installed

if you install a cheak valve to where your lines go into the pump this will keep the pump primed saving you a lot of frustration

first off when you set grade that determines the height of your pool levl it will probable be neccesary to change the grade of your yard.your concrete concern could be fixed by using a skid loader to take the concrete back to the pool .you will have to get concrete twice once for the pool footer then for the deckmake sure you use a transit when you excavate and when you level the pool walls you want to be somewhere around a 1/4"and 1/2"everwhere and make sure you square the pool properly to the specs yhey will give you if not the pool liner will not fit properly. in my opinion do not use sand for your pool bottom use v16 vermicalate and also duct tape all your seams and use wall foamto extend the life of your liner and i would use 1 1/2"spa flex for your plumbing that will eliminate a lot of glue joints that could leak latter hope this helps you brian

Vinyl liner Middle TN

the name of the company is fantasy pools llc thier number is (717)548-4112 what state are you in

if your installing a vinyl liner or fiberglass pool i would be happy to talk you through it what state are u in