baggies

What can I say you guys are the best no problem too small Thank you very much Mikey for your time in answering my query maybe one day I can repay the favour. Thank You so much!

Generally, you want the circulation pump running all the time. It keeps things fresh. That said, look for settings for the filter cycle. That is usually what controls the circ pump. If it is a Gecko system, there are settings for how long the filter cycle runs from continuous to something less than that. Thanks for that, I am not to sure what make of system it is as the only visable wording is Hydroquip. But how come when I lower the temp via the control panel this circ pump goes off that is the bit I can't understand?

My mother has a hot tub and for some strange reason the circulation pump runs at low speed all the time, this pump is used to circulate the water when heating and althought the heater does turn off when it gets to temp the pump remains on all the time. If I manually alter the control panel and drop the temp setting down by 5 degrees or more the pump stops the equipment on the tub is Hydroquip 9000, I am unable to find much information on it regarding 24hr circulation and if it is possible to stop this or is it a problem with the tub look forward to some help here.

Thankyou to all of those who replied the information has been extremely helpful and it looks like I might be able to enjoy my tub for a little while, or until the next problem. Will certainly be coming back for more info.

Do you have a ph neutral shock? if not it eats it up What is this ? and should I be putting this in all the time or just when I have changed the water? Thanks for responding

Hi has anybody got a remote control for a Coastal Spa Hot Tub apparently they are referred to as B.O.S.S remotes. If not does anyone know of a remote that can be used for the Coastal Spa Vantage Model or if it is possibel to get the IR codes to program a universal remote to control pumps and lights

Hi New to this so will have to bear with me, recently purchased new hot tub and after about 4 weeks of use I have to keep adding Ph increaser as the Ph is droppingon a daily basis the Hot tub is used regular and the clarity of the water is good have had some foaming issues which seem to have been resolved with the use of anti foam. Any ideas?