Budarooski

I have my Easy Touch set as follows: ---------------- SPA Temp: 98 F Heat: On ---------------- That means when I MANUALLY press the SPA button the heater will kick on. Now, I have my Easy Touch programmed to run the SPA for 30 minutes each afternoon to give it a good turn-over. Note this is AUTOMATICALLY turned on. My question: Will the heater come on when the SPA is automatically turned on? According to the manual, the heat ON/OFF setting is for the MANUAL button, but it does not say what happens when a circuit is engaged via an automatic program. I know I could run some tests and get my answer, but if someone here already knows, that will save me some time. Thanks!

It is connected and controlled by the Easy Touch. I read the Intellichlor user's guide last night and it appears the only way to NOT produce chlorine is to set the % to 0. I'm still curious why I can change settings via the buttons on the unit when it specifically says those buttons will be disabled when connected to an Easy Touch system.

My Intellichlor is connected to an EasyTouch system. I have the Intellichlor set to 40% via the Easy Touch, and according to the Intellichlor User's Guide, the More/Less buttons on the Intellichlor should be disabled, however, I am able to change values via these buttons (but the output value does not change in the EasyTouch). So, now the EasyTouch says 40% and the Intellichlor says 20% (because I just pressed the Less button), so what is it REALLY going to run at? 20 or 40%? Other question: Is setting the output to 0% the ONLY way to NOT produce chlorine via the EasyTouch? If I set the Intellichlor to OFF via the EasyTouch, it still produces chlorine. The user's guide mentions that you have to set it to 0%, but then why is there the ON/OFF option if it's not going to turn it off? Any help would be greatly appreciated!