Jump to content

Sean_L

Members
  • Posts

    5
  • Joined

  • Last visited

Posts posted by Sean_L

  1. Let me tell you about my experience with Arctic Spa and Onzen. I purchased my Yukon tub 3 years ago and spent a bunch of money on the Onzen option. This was the original version 7 which produced both ozone and bromine. I had nothing but problems with this unit as did hundreds of other people. My electrodes were replaced 3 times before being "upgraded" to Version 8 on the forth time.

    What they neglected to tell me was that version 8 DISABLED THE OZONE GENERATOR. So what I was left with was a bromine/chlorinator...THAT'S IT!!! If I wanted to generate ozone they will gladly sell me an additional "Peak Ozone I or II system" for a s****load of money. I'm pretty PO'ed. My original Onzen system generated both bromine and ozone THAT'S WHY I BOUGHT IT!! They installed this new 8.0 cell and neglected to tell me "by the way...this won't generate ozone anymore". I bought an Arctic Spa because I thought it was the best. BOY WAS I WRONG!!! I will never recommend this manufacturer to anyone again. Their R&D sucks and they treat their customers like ginnea pigs. My neighbours made the right decision and bought a Sundance.

  2. I just got the Onzen 8.1 "upgrade" on my 3 year old Yukon. I've noticed that the new replaceable electrode generates a lot of bromine, however the system does not seem to produce any ozone. The old 7.X system actually bubbled ozone through the onzen port that contained the electrodes, however the new electrode does not. I took the cabinet door off to take a look and noticed that there are no hoses connected to the onzen port, just the electrical leads for the electrode. I seem to remember an actual hose connected to the 7.X system which would deliver to ozone gas to tub. Can anyone shed some light on this for me? Thanks.

    It's confirmed...if you had the "onzen upgrade" from a 7.X to an 8 THEY'VE DISABLED THE OZONE GENERATOR. So what you're left with is a bromine/chlorinator...THAT'S IT!!! If you want to generate ozone they will gladly sell you an additional "Peak Ozone I or II" for a s****load of money. I'm pretty PO'ed. My original Onzen system generated both bromine and ozone THAT'S WHY I BOUGHT IT!! They installed this new 8.0 cell and neglected to tell me "by the way...this won't generate ozone anymore". I bought an Arctic Spa because I thought it was the best. BOY WAS I WRONG!!! I will never recommend this manufacturer to anyone again. My neighbours made the right decision and bought a Sundance.

  3. I just got the Onzen 8.1 "upgrade" on my 3 year old Yukon. I've noticed that the new replaceable electrode generates a lot of bromine, however the system does not seem to produce any ozone. The old 7.X system actually bubbled ozone through the onzen port that contained the electrodes, however the new electrode does not. I took the cabinet door off to take a look and noticed that there are no hoses connected to the onzen port, just the electrical leads for the electrode. I seem to remember an actual hose connected to the 7.X system which would deliver to ozone gas to tub. Can anyone shed some light on this for me? Thanks.

  4. we used our spa yesterday and we noticed a big difference in the quality of water, it had a soft texture to it, left the skin feeling soft and it felt good and for the first time i actually relaxed in it.

    I just hope the install error (valves) havn't put any long term damage to the Onzen system as a whole.

    Early days though, but if the last 48 hrs are anything to go by, things are on the up. B)

    My Problems are still present

    Tech came and said thoroughly checked the system. Says everything works great and Onzen checks out. SO, I dumped the tub AGAIN as instructed, cleaned it thoroughly with bleach, cleaned that out, filled the tub, put in two full cups of bromine salt, one cap of ultra spa, set cp to 3, and fc to 1. I checked the ph and the alkalinity, both were in spec. The water looked great that night. It is now 24 hours later. Free bromine according to my strips is zero, water is starting to look cloudy again. No one has been in it or the tub touched in any way. I am getting so frustrated, I do not know what to do. I am bringing in the water for a test tomorow but am going to start proceedings toward getting the tub returned and then buying another tub.

    Is it possible that the bromine salt in the bucket is actually not bromine Salt ?????? I am grasping at straws here.

    BMR

    Did you get your Onzen problem sorted out? I'm having the exact same problem as you....NO BROMINE BEING PRODUCED. I've now filled the tub up again for the 4th time using the new proceedure of adding only 1 kg of salt (soduim bromide). All of the settings have been set as recommedned (CP 3, FD2, FF4)....It's been 3 days now and no measurable sanitizer!!!!

    I don't know whats wrong. I've followed the Onzen troubleshooting guide and the system is bubbling as it should however no bromine is being produced. I'm wondering if the system will still bubble even if the electrodes are not functioning. What really annoys me is that the Arctic service department said that if the send a technician out and they can't find anything worong with it, they are going to stick me with a $100 bill. My tub is only 4 months old and this Onzen thing has never worked properly, as far as I'm concerned they should send a technician out free of charge for all of the hassel that I've experienced with this thing. I see that the tech told you that there was nothing wrong with your system which can't be the case since you're still having problems....Did they charge you for the call?

  5. Hi guys,

    Recently my (arctic fox with Onzen) tub has gone from not requiring much attention to getting very dirty, very quickly and the filters have been dying faster - I use those foam batting ones - the first lasted about five months no problem, the last two have died after about a month. I've emptied, scrubbed, dried and refilled. Green scaling appeared on the filter plastic, and on the sides as a slight "tidemark."

    I opened the spa door to inspect the Onzen dial and found everything was fine - except for some slight pooling of water on the floor of the inside of the tub on the right hand side. The water is slight, but brown and rusty looking. Should I be concerned?

    Also, can someone list what their setup from clean, fresh water is, with regards to chemicals? Do people add anything? Everything?

    I too have had nothing but a headache with my Arctic Yukon with the Onzen system.

    I purchased it in August and have had to change the water once a month (even though my wife and I only use it about 3 x a week). I have gone through 4 buckets of sodium bromide salt, countless bottles of Refresh and 4 complete water changes!!!!!!!

    I am thoroughly disappointed with this product. I have a $12,000 tub in my back yard that goes green within a week after a water change. I have left messages with the service department and I'm still waiting to hear back about a service call.

    The system is producing lots of bubbles as it should but zero sanatizer. My CP level is set to 3 and I only get an ORP reading of 150, no measureable amount of bromine is being produced.

    Any suggestions Tom?

×
×
  • Create New...