Wingfan13

Well...it's fixed and I have no idea what I did. I cleaned the skimmer basket and there wasn't much in it. I opened the filter back up and cleaned it out again. I turned it back on and everything was working fine. It did seem this time when I tightened the bracket on the filter that the bolt went much farther than last time. I am not sure why because the bracket was on completely. Anyway...thanks for the help. It looks like I accidentally fixed it.

I appreciate your help on this. I just went and opened up the top of the actuator. It looks brand new inside and I can't see anything that is broken or doesn't look right. When I go to the spa when it is in pool mode I can't feel water coming out of the jets but I am not sure how hard is is supposed to be coming out. I can't imagine this is an issue but could too much water in the pool cause an issue ? We had a ton of rain here and the pool water is all the way to the top if the pool.

I went to the control panel and switched it to spa, both turned 180 degrees. The thing is, when I hit mode again it doesn't go to spillover, it goes back to pool mode. Also on my unit, configuration mode is locked so there is no way I accidentally changed something there.

How do I check/test the actuators ? Could this just be a setting that I accidentally changed ? I have an Aqua Logic automated system. I took this quick video of the timer settings on it. I have no idea if this is helpful at all. http://youtu.be/9nyiCj30Klk

Here is a link with pictures. Let me know if you need better pictures. I appreciate the help. https://picasaweb.google.com/108733394526381289765/DropBox?authuser=0&authkey=Gv1sRgCLzIofGykLXIWg&feat=directlink

I am hoping someone can help me out. I have a spa that is elevated above the pool and water flows over the spa wall into the pool. When I woke up this morning the spa water level was low. The last time this happened I replaced the flapper (Jandy valve?) and this wasn't even a year ago. So I put the pool in service mode, took it off to see if it was worn out. It looked fine but there was a small leaf in there. I didn't really pay attention to whether or not it was blocking anything. I sealed it back up and decided to check the other one just in case and that was also fine. I cleaned the filters just the other day because the PSI was getting up there pretty high. Now the spa is not filling back up with water. The pump for the pool is working fine (I think). When I put the system in pool mode it is shooting water out of the jets. Does anyone have any idea what the issue could be ? Keep in mind I just moved into this house 8 months ago and have no idea what the hell I am doing. I can take pictures if needed. Does the water that is pushed into the spa to make the water fall over the wall come from the spa jets or the vents on the floor of the spa ? Just wondering. Thanks in advance for your help.