Jump to content

samanthalue

Members
  • Posts

    11
  • Joined

  • Last visited

samanthalue's Achievements

Junior Member

Junior Member (2/5)

0

Reputation

  1. What size pump do I need for an 11X18 oval above ground? Cartridge filter. We had a 2HP and I believe it was too large. It only lasted a couple years. It was a waterway. Looking to buy ASAP, suggestions appreciated. Thank you-
  2. Hi everyone I am looking to buying a used Baquapure Sand filter. I am replacing my liner in my above ground 12X18 oval pool. The filter I am looking at (on craigslist) is 22inches and it has a water polishing system included. Can anyone tell me how old this system is? It is a big blue bubble and looks to be in good shape. I can't find any information on these "water polishing disk" that you use with the system. Any help is appreciated! Thank you-
  3. Thank you so much for your help!
  4. Ok I am not an expert by any means so I need some help please. I kept my water regulated, drained every 4-6 months and haven't had one problem in the last 3-4 years. After my last fill up I went to turn on spa and it turned on fine, next morning it was off, no power, so I reset breaker and still nothing. I open panel and find this. Can someone tell me what kind of damage I have here and how much and how to go about getting this fixed as I am pretty clueless. All help is appreciated!! I have attached a couple links to pics, one of the model info and one of the inside burnt area/wires. Samantha http://i105.photobucket.com/albums/m215/samanthalue/photo1.jpg http://i105.photobucket.com/albums/m215/samanthalue/photo2.jpg
  5. I drained my Spa for the first time and before I did I powered it off from the breaker box in the garage. After filling it back up I flipped the breaker back on in garage but it has tripped the other breaker box near the hot tub. What am I doing wrong to get power back to it? I try turning the power on at the breaker box at the spa but it wont come back on. Thanks in advance...
  6. No.... BUmmer..... Thanks tho... Samantha
  7. My hydro spa was delivered yesterday. It was a floor model and there are a few problems that a tech is going to take care of when he gets here. But I was wondering does anyone know how to turn off the Economy Mode on the spa? It won't heat right now it did last night but the spa people said it needs to get out of economy mode and into standard for it to work properly. I have searched online, b/c what it said in the book doesnt work and I cant figure out anything. Thanks in advance.... Samantha
  8. Does anyone have any feedback or have one of these pools? http://www.atlanticpoolproducts.com/
  9. I went ahead and put down a deposit on it.....I have 30 days to decide. He also just about talked me into an above ground pool........ We'll see if I go thru with that.
  10. This tub was filled as a floor model. I believe I can even get him to come down more. Comes with Hard Cover, steps, delivery & set up and start up Chems. Tub looks like it is in perfect condition.....I am in FL so the cold weather will not be a factor, this tub will be set up in my FL room, sunporch which is climate controlled. I think this is going to be my best bet. The Walmart, Costco & Sams club ones look nice but what happens a month if something happens?
  11. I found a Hydro Spa '06 was a floor model has stainless steel jets for $3800. Am I getting a decent deal. I have Checked the reviews but I dont know of much else in my price range for what I am getting. I just want to make sure I am not getting ripped off. It is "The Stratus" http://www.hydrospa.com/spas/mark3_stratus.html Thanks....
×
×
  • Create New...