Saltyguy Posted September 2, 2010 Report Posted September 2, 2010 The power lines outside our house fell and caused a very brief powerloss followed by a surge which tripped several breakers in the main panel and the chlorinator subpanel. After resetting them I discovered that there was no indication of power in the Aqua Rite panel. no lights and the panel was off. I found that the internal 3 amp fuse had blown, replaced it and restored power to the panel which caused the 3 amp breaker to immediately blow again. Anyone have this kind of issue before or any suggestions? Thanks. Quote
Pool Clown Posted September 2, 2010 Report Posted September 2, 2010 Hmm, maybe the transformer took a hit? I don't know. Maybe someone from the east, that has lightning strikes often, can tell what may have gone out. Quote
Saltyguy Posted September 4, 2010 Author Report Posted September 4, 2010 Hmm, maybe the transformer took a hit? I don't know. Maybe someone from the east, that has lightning strikes often, can tell what may have gone out. Do you know where to find a schematic for the system? Neither the installation manual nor the user manual has one. Neither of them even mention the 3 amp and 20 amp mini fuses on the panel. thanks. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.