GLL40

Picked up some replacement jets for my used hot tub. Confused how to install them??? The stock jets seem to have 2 tabs where they just push down and twist to tight and then twist to release opposite way to get off. I was able to do this with the stock jets with water in the tub. The directions on the new LX conversion jets states i need to drain the tub and pvc cement the ring in place??? Any one use these jets? Just curious before i go at it again. thanks Gary

Ok how about... when you turn the lights on. what color do you guys get when you first turn on the tub? I'm a violet or blueish color

Seems like some one else is having the same problem but never got a answer. i did see the hot tub display random colors at the previous owners house now i am only getting a blue light on the shell floor and a violet light in the waterfall. could something have happend in the move. a wire loose? possible because i have it wired up 50 amp? any possibilities? i cant find anything on this. except for this post from some one else. all help GREATLY appreciated "I just bought a house a week ago and it came with a 2005 jacuzzi j-365 hot tub. My wife and I love it. We have used it about 4 times with no issues. Then tonight me and a friend got it, and the lights are not working right. To clarify, the led panel lights up fine, and when you push the light button the led panel shows the light icon so I know it reads the button is pushed, but the lights in the tub and in the waterfall is not working properly. I normally get a light sequence of random, red, blue, yellow,orange,teal, purple, and maybe I missed one or two but you get the idea. To operate you push the button, light comes on and led panel shows light button off, push button again and light turns off. And so on and so on to cycle through options. Well as of tonight, the only lights I am getting is red and blue, and sometimes it seams to try yellow or purple. Other than that, nothing. Sometimes when I press the button to switch colors, it just won't turn on a color, but the led will show that it is on, and others, it just goes to the colors that normally show through. I'm not sure if it is a bulb thing, but I wouldn't think it would affect both, or if there is a special swith that operates it. It was working just fine before this"

Would having my jacuzzi j365 wired 50amp setup make the lights no turn on random setting? I just got a 2005 hardly used one and i love it i just cant figure out how to turn the light setting to random. so all the different colors display...only getting blue color right now??

Hello Gary Here from Maryland. Just picked up a used 2005 jacuzzi j365 and i love it! when i got it from the owner they showed that all the lights would work and change colors. I found out when i got it home this was called random mode. When i got it all wired up everything works fine here at my house but i cant get the colors to all change randomly. i can only get a blue light on? When i saw it at the previous owners house all diffrent color lights would display. now just blue. i read the owners manual about the sequence did i maybe "reset" the lights? I feel like this its just something i'm not doing right.