Jump to content

h20tub

Members
  • Posts

    2
  • Joined

  • Last visited

h20tub's Achievements

Newbie

Newbie (1/5)

0

Reputation

  1. Pfamily: Is it the pump itself that is making all the noise or the vibration from the walls when the pump is running? The 2" water supply hose in my tub came free of the blow-in insulation, just inside the removable panel and it made a heinous vibration noise, because it was leaning against the inside cabinet. I moved it off of the inside cabinet and it is much more quiet and I will attempt to re-adhere the hose with more blow-in insulation. (not that this is the same problem you are experiencing) How about using one of those egg crate memory foam bed pads to line the inside and absorb some of the noise? I think you can buy different thickness so you could move the pad around inside the panel. Just a suggestion...good luck. Let us know what works best....if all else fails...turn up the tv volume or get ear plugs!
  2. I too, have a Nordic XL. I agree there is a dull humming noise when the recirculation pump or heater comes on, but I guess you get used to it. I can hear it kick on but then, I don't even hear the pump. Have you tried to adjust the two large jets (the two that create the whirlpool effect)? I place the two of them in a "middle-neutral" position so that minimal water comes out of any of the side jets, and about an equal amount of water comes out both the big jets. It makes it quiet enough that I can hear the bears or skunks sneak up on me!! Try that, see if it works. I'd be curious if you can resolve the noise problem. Good luck...
×
×
  • Create New...