Jump to content

Delgado

Members
  • Posts

    57
  • Joined

  • Last visited

Delgado's Achievements

Spa Savant

Spa Savant (3/5)

0

Reputation

  1. Ok clown so I looked up how to disable the spa remote from the control with 6 pins and when I powered up the breaker the filter turned on maybe it's normal since I turned off the breaker while it was on spa mode but I waited while it switched back to filter pump mode and just waiting what it does , just wondering and remembered that my waterfall turned on by itself also , let me know what you think , meanwhile ill wait to see what happens ,
  2. Ok so I put the system on time out on tbe outside main control panel so the rs6 display isn't functional and the next day the spa turned on automatically and it's not even programmed to turn on at any time , what do you think I need , thank you soo much
  3. Ok so I put the system on time out on tbe outside main control panel so the rs6 display isn't functional and the next day the spa turned on automatically and it's not even programmed to turn on at any time , what do you think I need , thank you soo much
  4. Do I disable it from the panel itself or out side control box
  5. Ok so I got this problem I can't figure out , my in house control panel ( rs6 model ) turns on randomly , last week I thought I had a short and the jacuzzi lights started to turn on by them self then I reset the whole box by turning off the power then few days later the water fall started to turn on , I reset it again and it still turned on untill I decided to turn off the pump for the water fall , now the light from my heat spa turns on I don't know what it could be. Is it a relay or what can I do to fix my problem , thank you for listening
  6. So just noticed a hair line crack on the bottom of the pool in the shallow end of the pool , should I be worried , or is there a way to fix it whith out emptying the water , or is there a way to see if the water is leaking through there ,
  7. Mine is at 10 psi as well , sta rite system , but when I run the in floor system it rises to 20 psi
  8. Lol I think That was a joke lol cause I don't have a deck lol If I'm not mistaken. But just by the word leak scares me so no laying concrete , is there anything that looks nice that I can put , I don't like the idea of grass next to the pool , too messy when kids go in and out back to the pool and get grass in it ,
  9. Ok so now I got another issue , but first of all I want to acknowledge all of you professional pool experts here on this forum , especially pool clown and water bear for helping me with my pool , I am a newby with pools , but I learned more here than from a tech coming over , now back to the spa , I decided to control my spa from the in spa control buttons , and when I was done using the spa I turned everything off like normal , 30 min later the ligh turns on in it , so I turned it of from in the house , 10 min later the spa pump turns on , I thought it was the control buttons because it started after I messed with them but how do I change it ??? If that's the problem , but if there's a wire , how do I change the whole thing with wire
  10. Ok thanx to you all , I think I have to decide on something else besides concrete , maybe stone bricks that set in place , only because of what was said on if I need pipe repair I would need to cute slab , would these stone bricks be a better way for weight ,
  11. So I got it to work , just fed it water from the pump basket and it startet up again no idea why it stopped working though
  12. Hi I wanted to first thank all of you for your help on this forum , I learned alot from you all , the advise I get helps me fix my problems and saves me headaches , and money , ,, I have my pool on one side of the yard and pump and heater system on the other side , with grass in the middle of them both , I want to eliminate the grass and pour concrete , but I'm not sure if barrying the pipes would be a good idea , if it's ok to do so how far down are the pipes barried from the pump to the pool , thank you all
  13. I just moved in and never REALY paid attention on the spa mode , , that makes sense on the jets cause just today I closed the valve for the jets and got more psi , to my in floor system , wich now it works fine , I thought something was wrong with it , I also cleaned the o ring and tank and closed it up the way it recommends and guess what , no leak , thank you guys soo much I was going to change the oring but before that I thought to clean it really good and found alot of debri on the oring , it still looks a lil used and abused , the system is 10 years old so if it leaks again I'll replace it , thanx again guys
  14. I did clear the memory on my rs6 display in the house but when I turn the aux 1 for the water fall it does turn on but no pressure flow coming in , or not drawing the water from the pool
×
×
  • Create New...