Shempinator

I just replaced a bad flow switch on a Sundance Spa. Things seem fine. Spa heats up. With pumps off a "solid" flo message appears a few seconds later. Im pretty sure that means the flow switch is not opening when the pumps go off, The bad switch had no continuity when closed. This problem is just the opposite . Any ideas? Thanks in advance...

OK Thanks. Is it ok to Jump the two wires to see if heat comes on? Thanks

Hello, I have a Sundance spa with no heat. The flow switch is Part # 6065-852. Was wondering if it's ok to jump the leads together to see if the heat comes on and the switch is bad. The switch is 12 years old. Also. I have 0 continuity on the leads when water flows and 0 continuity with no flow. Thanks for your help in advance...

Have a 1998 Sundance Optima Spa. Heater stopped working and not sure where to start. Any help is appreciated. Thanks

Hello, I am trouble shooting a spa with these symptoms: Breakers activated, blower and jets turn on. Customer shuts both off. several seconds later, blower and jets come back on, customer turns them off and the cycle repeats over and over. I had him unplug the ozone system but that didn't change anything. The spa is about 8 years old. Any help is greatly appreciated. Thanks in advance, Shempinator