Jump to content

G-Force

Members
  • Posts

    5
  • Joined

  • Last visited

G-Force's Achievements

Newbie

Newbie (1/5)

0

Reputation

  1. I May have this one figured out guys. After changing the filters on the grid it seems to be back to normal. Keeping my fingers crossed.
  2. BOught one of those polar is pressure gauge today and everytime It is plugged the pressure is less than 10 psi. Impeller is brand new, new pump, and new seals. Personally cleaned all the filters individually. Pressure at the filter is normal at 10-20psi. Polaris mesh filter is clean, polaris sweeper already taken apart and inspected. Call a third pool company to come over and inspect, guy said my problem is weird but he will check it out.
  3. Guys, the problem is not the polaris. THe problem is not enough pressure to no pressure to power the polaris. I do have a screen/filter on the polaris.
  4. What brand/model of sweeper? Is it run off a booster pump or is the sweeper fed only by the main circulation pump? How long does it run before stopping and what do you do to restart it? What is the pressure at your filter (PSI)? What did the pool company's service techs say about this? Polaris, runs off a booster pump. When the tech was here they played around with it and it ran for about 10 minutes and stopped both times. One tech comment was "I dont know what to tell you" The PSI at the filter is approx 20PSI now but drops after I backwash. Right now with the booster pump running the sweeper just sits in one spot.
  5. Let me first of say that any help at this point would greatly be appreciated. I have called two pool company to come out and investigate with no luck thus far. The pool sweeper completely stop working all of a sudden. If I disconect the sweeper from the side wall of the pool there is very low pressure coming out. I have back wash several times, change pump with all new rotating parts. WHat else should I do to get this thing running?
×
×
  • Create New...