Wanted add elect hook up question;
From sub panel, 30 amp & 20, is there a differance between L1 & L2, i cant find anything that says which one is which, i thought they told me a hot is a hot, also here is the way things are connected:
for the 30 and #wire, hots from 30 to spa got to 1&3, ground from sub panel #10 go to spa ground located on the lower right, next #12 wire, hots out go to 2&4, white neu to #5,
pig tails conected from breakers to neu bar and neu from breaker on the #12 run from 20 amp breaker. No neu being used on the 30 amp. (except for piggy), it does look like the ground from the #12 is put in the sub panel ground box but not used at the spa area, would this have any effects, wouldnt think so but who know, have checked this like a thousand times.
ubootwo
Another note, spa is not in summer mode, we actullay tried several times to put it in summer mode and it would not do! thought maybe somehow it got into this mode but we could not get it to go into that mode, ie holding down on both temps same time for 3 secs, we tried 5 secs, 1 min, it just would not do it, so i can rule this out i think.
Chas,
do u have a pm i can send u some pics? maybe u can see somethin.
ubootwo