KevinNH Posted July 21, 2015 Report Share Posted July 21, 2015 My Tiger River Siberian (2000) is leaking in a couple of spots. Pretty much in the middle of the tub is where the first drips showed up. Early in the winter of 2014 I bumped one of the drainpipes while shoveling snow, and it started to leak there also. I have not had an opportunity to attempt a repair until now. I took the tub off the deck, and right now it is up on its side. I have removed the outer urethane in a couple of areas with a claw hammer, and then removed some of the foam with a pressure washer. Now that I can see some of the tubing, my concern is: how am I going to see where it was leaking? Unless a crack in the tubing is large, I can't imagine how I will find it. I am considering laying the tub back down, filling it and adding some dye to the water. Hopefully that would stain the foam? It leaked most when the circ pump was running, making another issue; I have no way to run the circulating pump in its current location. Someone with more electrical knowledge than I have could probably wire enough 110 to run the pump. I have new cover, new circ pump, and everything else works fine. Kind of hate to give up on it. Any advice members of the group can provide would be much appreciated. Kevin Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.