Jump to content

some help

Members
  • Posts

    5
  • Joined

  • Last visited

some help's Achievements

Newbie

Newbie (1/5)

0

Reputation

  1. Hello Im not totally sure but will you look into the copper content of your pool chemistry .......
  2. Hello......... Low speed on a 2 speed pump is a waste of energy specially on a 2 story rooftop solar heater
  3. Hi In my experience SAM lights are great they actually will illuminate the water not the pool plaster but of couse the plaster color will come through a bit ( get ready to spend some $$$$ for the light and a bit more for install.... wish you luck and happiness.........did electric
  4. Hello .. First, thing to do is check with city for permit requirements and apply as nessesary An electrical contractormay be needed Second, If no permits are required All power wires must be in conduit 1/2''-to 3/4'' as needed all connections must be made in weather proff boxes with gaskets on covers,and silicone on extra hole plugs Sub panels not required unless no space is left on Main panel, (A double pole breaker 240 volts for pumps ) and a (singlepole breaker 120 volts for lights) 2 pumps and an air blower and heater=30 amps breaker---1 pump only =20 amps breaker,all motors have the horse power and amps it pull on a sticker 8 gauge wire = 50 amps 10 gauge wire =30 amps 12gauge wire =20 amps 14 gauge wire =15 amps use #14 for lights=15 amps or upgrade wire and breaker as needed use WATTS x#of lightsdivided by 120volts=amps breaker size. (do the same with 240V equipment) bury all conduit at least 12 inches for 120 V and 18 inches for 240V( I know ...a lot of work) all timers, lights,air switches,and other controls you must supply unless you add them to your contract. And above all>>>>>>>> BE SAFE>>>>>>>>>>somehelp
×
×
  • Create New...