Jump to content

Clearwater Pebble Beach Signature Pump Question.


Recommended Posts

Greetings,

I have a recently acquired 2007 Clearwater Pebble Beach Signature model spa. The spa has four total pumps. Three of the pumps are Waterway PF-50-2N22C and the fourth is an always on circulation pump.

My question is regarding the three Waterway pumps. I believe these are two speed pumps? The literature on the Clearwater website indicates that they could be either one or two speed.

When I activate the pumps from the top side controls it appears they are only one speed. They turn on and off with single pushes of the button. On/Off. There is no On low/On high/Off.

Is this normal. Can these pumps be made to operate in two speed mode. The literature seems to imply that they can.

Thanks in advance for your response.

Link to comment
Share on other sites

Grats on your new tub. It is a really nice one. It is operating as it should.

If the pump sticker shows 2 different numbers for RPM or Amps, then it is a 2 speed. I believe that sometimes they would put a 2 speed pump in but have it set to only operate on one speed. I'm not sure how they do it. I could be wrong about that. If it only shows one number for RPM or Amps then it is a one speed.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...