Hello everyone. I have a question on liner shrinkage. I just recently had a company install an 18x33 oval and when I started the water in it, one side of the oval, the liner was stretching and they had installed the top track so the overlap couldnt be adjusted. I stopped the water at about 3-4 inches. They took 3 days to come back so I emptied the pool because when I got in, the sand had not been tamped so it was very hard to push wrinkles to see if I could take off the tension. Anyway, when we tried to put the liner back up, it is 1 foot short on the bottom seem at the oval end. One oval end and the sides are fine past the last kicker but I begin to pull the wall over if i try to get it over the oval end. Could this liner have shrinkage already? I have no alignment marks in the liner but for 2 bottom seams that i tried to lineup centered on the 33 ft line from oval to oval. This installation started Jul 1st and I still dont have a pool and they wont seem to come back so I need all your help. I have 8 relatives showing up wed afternoon to try and help me get the liner in. Has it Shrunk?
Thanks