Jump to content

r2rickster

Members
  • Posts

    5
  • Joined

  • Last visited

r2rickster's Achievements

Newbie

Newbie (1/5)

0

Reputation

  1. Did you press the black button on the display and hold it in for about 5 seconds? It generally flashes to let you know to check and clean your cell. When you hold the button in it resets and then stops the flashing.
  2. Are these leds on solid or are they flashing?
  3. I installed the new board and all is back to normal (for now!)
  4. I ordered a new board and should receive tomorrow. Will let you know if it is the fix. New board is about $200 and pretty easy to install. For $900 you could get a brand new system including the cell.
  5. I am having a similar problem. My power and generating light click on and off. While they click on and off I cycle through the diagnostic display. The cell voltage starts counting up from 0 and the cell current reads 0. These according to the specs should read 22.0-25.0 for the cell voltage and 4.5 to 7.8 amps for the cell current. I am going to replace the main pcb as the constant clicking is not right. Speaking with Goldline they also agreed that it is most likely the board. This would be the second board in 4 years. Goldline told me that possibly I could get a 40% pro-rated price from a local service call. Still if it is more then $250.00 I could install it myself for less money.
×
×
  • Create New...