Jump to content

Waddle08

Members
  • Posts

    2
  • Joined

  • Last visited

Waddle08's Achievements

Newbie

Newbie (1/5)

0

Reputation

  1. try removing the panels of the spa and check where the air goes into the air diverter some times they wrap tape around them when they make the spa to keep the foam out and it may have worked it's self into the air intake also if 1 jet is nfg it will stop air from the other jets on that side from working as well.have you spoken with a coast flaws service rep? Hi David I fixed the issue at the weekend, I replaced the back of the jets on three seats. The backs were loose fitting in the holes in the tub, so the suction needed to pull the air to the jet was not there. this all works fine now Regards Waddle08
  2. Hi All I'm a newbie to the forum, but I'm hoping somebody can help me. I have a Coast Spa Paradise40 tub, which is 4 years old. I recently drained and refilled the tub, but now only one side(right hand side) of the tub has air coming through the jets when the venturi are opened. I checked the jets, and all are open, but of the 6 seats only three have air coming through. The three seats that don't have air are on different pumps aswell. I took out the air controls, and the "ping-pong" ball is loose in the hole for each pump. I wondered if it would be a good idea to put my garden blower over the open air control to see if that would force through any air? The water pressure out of the jets is fine, so I don't think I have an airlock? Any help would be appreciated, to save me calling in the expensive Engineers Best regards Waddle08
×
×
  • Create New...