Sign In
Register
Help
Subscribe to brutus' Blog
2 Comments
Posted by
brutus 
infinity spa pump not starting on initial setup electrical is set up right gfci works well fuse good any ideas thanks
Share This Entry:
2 Comments On This Entry
Page 1 of 1
Kefbum
15 March 2009 - 07:41 PM
At your own risk! Alwys, check the fuse first and work your way back from the power source.
Starting at the breaker, check to see that you have power at the pump with a volt meter. If no, its the power line or breaker. Continue through to the actual plug and check the voltage where you connect the pump. If you have power and the pump is not working, get a new pump or motor.
Starting at the breaker, check to see that you have power at the pump with a volt meter. If no, its the power line or breaker. Continue through to the actual plug and check the voltage where you connect the pump. If you have power and the pump is not working, get a new pump or motor.
jem_plumbing_it
07 April 2010 - 03:47 PM
i prefer a plumbing contractor in California for this kind of job. had some fair share of electrocution... not the guy for the job i guess. lol 
Page 1 of 1
← September 2010 →
| S | M | T | W | T | F | S |
|---|---|---|---|---|---|---|
| 1 | 2 | 3 | 4 | |||
| 5 | 6 | 7 | 8 | 9 | 10 | 11 |
| 12 | 13 | 14 | 15 | 16 | 17 | 18 |
| 19 | 20 | 21 | 22 | 23 | 24 | 25 |
| 26 | 27 | 28 | 29 | 30 |
Recent Entries
-
Pump Not Starting
on Jan 22 2009 10:43 PM