Community Status Updates
I have a Jacuzzi J-340 and recently the top side control stopped working correctly. The unit reads the temperature, and runs the pumps automatically, but i cannot move temp up or down or control the pumps manually with control. Does that sound like a topside control issue? Im sure with a circuit board issue, the control wouldn't work even more??
Have been trying for about 2 months to get my pool cleaned up. Started by removing all debris, leaves mostly off the bottom and added tons of shock. In the years past it has always cleared right up. This year.....not so much!! I have spent $300+ on chemicals and have had it tested many times....I have even taken it to different places and I get a different solution each time. Now, we do have a small leak in our 16x33 above ground pool and I have had to add well water through...
Need advice on re-plumbing my pool. In the process of re-plastering my 45 year old Paddock pool, I was told my return lines were cooper. Very bad for plastered pool. In order to correct the problem I was quoted $12,000. The cost breakdown is $4,500 to cut 2' x 110' linear trench around pool perimeter, add 6 pvc returns, 2 new skimmers, and 2 drain lines