and1_e30 Posted December 14, 2016 Report Share Posted December 14, 2016 hi im new to this forum i have a coast spa unsure if its a 2008 or 2010 model the panel looks carbon fibre and say coast spa elite series ,had it for just over a year now. im having trouble with low flow the LF icon flashes up i have re primed the pumps several times taken the filter out soaked it in cartridge cleaner pressure washed and put back in. ive even left the filter out overnight to see if the filter is nackered but it keeps coming back! would it be a temp sensor? also when i was in it the other night when the pumps were on the temperature was saying it was going up and down rapidly but when pumps off it was normal then the tub shut down and Dr message appeared. after taking filter out leaving out for the night putting back in priming again dr no longer came up but i dont know if its all linked? any help would be much appreciated jon Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.