• Announcements

    • webmaster

      Missing Posts   09/21/2016

      We are aware some posts are missing. This is due to our server upgrade. You will need to re-create any posts you have made that are missing. Thank you for your understanding on this matter.
Sign in to follow this  
Followers 0
workinallthetime

Flagstone Coping Scratches From Contractors

3 posts in this topic

i'm nearing completion of my pool, my builder has been great, i've noticed that from the time the flagstone coping went in, it has recieved numerous scratches from the contractors whove done work after the coping was installed, namely the decking, when i say scratches i mean some rather large marks from what looks like other stone dragged over the coping, since i'm nearing the completion i'm wondering is this something that is easy to fix/replace before the final plaster, or is this typical , it seems more care should have been given to the coping

Share this post


Link to post
Share on other sites

This is right up my alley..... But, i've always been a big advocate of "the custom is always right" FOR THE MOST PART. First, just ask your pool builder to see what they can do. Explain that it bothers you, and you would like it to look like it was originally installed. A good swimming pool company will usually address ALL of your concerns, no matter how trivial.

Now here's the challenge. Flagstone is a soft stone, so, it's going to scratch & degrade over time. In fact, i've seen some flagstone copings literally FLAKE away in layers... Flagstone is made of lots of small layers of sand, compressed together over time. It's actually pretty easy to buff out, but it then creates a more noticeable area that is smoother than the other stone. So, in my opinion - it's better to leave it, and let it buff naturally as you use the pool. It doesn't seem like replacement is warranted, but that's the worst case scenario (and they won't like you for that.....but, you are the customer) Most pool companies are NOT stone experts, so make sure these guys test a small area if they offer to fix it. Make sure you like the fix before they do all the scratches. Once buffed, there is no going back!

While I'm thinking of it, make sure you DON'T have a salt system! Salt and Flagstone don't mix. The salt crystals are 4 to 5 X larger in dry state, than in liquid. So, these guys get into the flagstone very easily, dry out, expand, and will actually turn the flagstone to DUST over only a few years. we've been semi-succesful with sealants, but sealants wear down.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now
Sign in to follow this  
Followers 0